Sunday, September 23, 2012


I decided I would attempt to build my version of a Clip-It-Up.  It was actually really easy to build.  I went to Home Depot and purchased a 3' thread rod, a pack of lock nuts, a pack of hex nuts and washers.  All the materials were 3/8".  I also purchased a ceiling plate (used to hang a light fixture).

  I came home and started the assembly.  I was going to use the ceiling plate as the base but soon realized that it was not quite large enough or heavy enough to stay upright.  I looked around the house for something more substantial.  I found this lamp that I didn't use because the switch did not work.  I pulled off the works on top, and took out what was inside.  I took the thread rod and screwed it all the way in (this took forever!!!).  I notice that the rod was wobbly in the lamp base, I decided to make use of the ceiling plate and put it inside the bottom of the lamp base.
I screwed on a lock nut which stabilized the rod a bit more.  I dropped a washer onto the rod and then screwed a hex nut to the top of the lamp.  That finished stabilizing the rod into the lamp base. 
I then screwed on two more hex nuts to the desired height then I tightened them toward each other so that they lock into place.  Then I dropped on a washer, then the larger lampshade frame, then another washer.  After that, I screwed on two more hex nuts to just barely above the last washer attached, I tightened them up towards each other so that they lock into place.  I was sure to leave just enough room between the sets of hex nuts to allow the lampshade frame to turn freely.
Ok, so far, so good!!!  Woohoo!!!
Alright, now to the next part...
I screwed on two more hex nuts to the desired height (near the top of the rod).  I tightened them towards each other to ensure they were locked in place.  I then dropped on a washer, smaller lampshade frame, and another washer.  Then screwed on the last two hex nuts to just above the last washer attached, tightened them towards each other to ensure they are locked in place.  I was sure to leave just enough space to allow the lampshade frame to spin freely.  
Now that the boring part is done, I get to hang my embellishments and stamps, and etc...
I hung the embellishments, etc... using colored paperclips.  Here is a picture of the finished project!!! 
Finished!!!!  I Love it!!!!

It is going to make accessing my embellishments so much easier!!!  I am very happy with it!  :-)  

Here is a video showing how it works... 

Please comment and let me know what you think, if you have any questions or suggestions.  Thank you.

Sunday, September 9, 2012

Starting Heather's Graphic45's "A Ladies Diary" Mini Album

I have started the mini album requested  by my daughter Heather.  After having troubles starting, I have finished with the base part of the cover.  I am happy with how it is looking so far.  I was ready to tear it up and start it over when it wasn't going together very well.  I decided to walk away from it for a day.  I went back to it last night and everything I did with it went very smoothly.  I will be adding embellishments, but this is what I have accomplished as far as the inside and outside cover.

I need to make a trip to the store for cardstock before I can start the pages.
Tomorrow is another day.  :-D

Wednesday, September 5, 2012

Pictures of my "Ladies Diary" Scrapbook Mini

Well, I finally got around to taking pictures this evening. I used my daylight bulbs because it was just too danged hot to go outside to take pictures today! We had a heat index of 108 when I checked the weather. WOO!!! That is hot!!! Anyways, here are the pictures I promised. I hope the true colors show in these pictures. I just love this paper.


Click on Photo to Enlarge

Click on photo to enlarge
Click on picture to enla

Tuesday, September 4, 2012

I DID IT!!!!

I made my first video, and finished my first scrapbook mini!!!  I am so happy with how it came out other than my voice was too quiet.  I am also pretty happy with the mini.  I used Graphic45's "A Ladies Diary" scrapbook paper, I made it for my Mother and she loves it!!!

Here is the video...

I will post pictures tomorrow.

I am so excited to start my next project! WooHoo!!!!